Shop by Device For PC

UGREEN M.2 NVMe SATA SSD Enclosure 10Gbps USB 3.2 Gen 2

~~$29.99~~ $9.00

UGREEN NVMe SSD Enclosure

~~$259.99~~ $78.00

UGREEN USB 3.0 4-Port Switch With 2 Pack USB Male Cable

~~$36.99~~ $11.10

UGREEN USBC Switch - 2-Port, 4 x USB 3.2, 10Gbps Data

~~$69.99~~ $21.00

Previous page

Next page

Previous page

Next page

Attention

About USB A Laptop Only need to use a USB-A to C data cable (best within 1.2ft/0.8m) to connect this switch and computer. Input Tip: This is a USB C switch not a KVM switch and doesn't support a monitor; the USB-C input does not support video and there is no HDMI input. This device is designed for data transmission and does not support video transmission. Output Tip: The USB port at the output is only used for data transfer and does not support power supply for a laptop/USB devices or video transmission. Not suggested to connect wireless devices to USB 3.0 switch due to 2.4Ghz co-channel interference (industry problem). If your wireless network is affected, please set your router frequency from 2.4GHz to 5GHz. About Data Cable Length: Using a cable longer than 0.8M may cause a drop in transmission speed. About Power Supply: When connected to a USB-C laptop port, this device can output a Max 2.4A, enough power to run four 3.5" HDD/SSD or two 2.5" 1TB HDD/SSD at once.

When connected to a USB-A laptop port, please note that due to the limitation of the USB-A port output current, the switch only can output 5V2A. Other: Connect to USB-C IN1 and USB-C IN2 simultaneously, PC 1 will be given priority to share USB devices. Package Content: USB 3.2 Switch * 1 (4.8 x 2.1 x 0.7 Inches); USB C to C Cable * 2 (2.6FT/0.8M); Remote Control *1 (5FT/1.5M) About Mac: For Mac OS 13.3 and above, please allow usb devices to work by doing this setting: Use the mac's own touchpad to choose Apple menu > System Settings > Privacy & Security >Click the pop-up menu next to “Allow accessories to connect“ > Choose "Always". About PC is sleeping: If the USB device is disconnected after the PC is awakened from sleep mode, it may be caused by the energy saving mode. Please turn off energy saving and try again. [Windows] 1. Control Panel > System and Security > Power Options > Select the "Change Plan Setting" option next to your current power plan > Select "Change advanced power settings"> "Power Options"> "Expand the USB Settings section and double-click USB selective suspend setting."> Select "disable". 2. Device Manager > Universal Serial Bus controllers > right-click all hubs that have been detected > select "Properties"> Power Management > deselect "Allow the computer to turn off this device to save power." [Mac] Please follow the below steps to disable the Mac into auto-sleep to see if the issue can be solved: System Performace > Battery > Disable "Prevent computer from sleeping automatically when the display is off", and disable "Enable Power Nap while plugged into a power adapter".

UGREEN 2.5 Inch USB Hard Drive Enclosure

~~$22.83~~ $6.85

UGREEN 40Gpbs Hard Drive Enclosure with Cooling Fan

~~$109.99~~ $33.00

UGREEN USB 2.0 Switch 2 In 4 Output USB KVM Switch

~~$23.99~~ $7.20

UGREEN USB 3.0 Switch 2 Computers Sharing USB C & A Devices

~~$45.99~~ $13.80

Previous page

Next page

Previous page

Next page

Attention

NO KVM Switch This USB switch has no HDMI port and doesn't support sharing a display between two computers. NOT Video Transfer Designed for data transfer only, not video transmission. Keyboard & Mouse Disconnection 1. Due to 2.4GHz interference between wireless signals, multiple wireless devices connected to the USB switch may not function properly (industry issue).If interference occurs, switch your devices from 2.4GHz to 5GHz. 2.If the device srtill does not work properly, connect the power adapter to provide sufficient power supply. Avoid Using a USB Hub Not connect the switch through a USB Hub, as it may degrade signal quality. For stable signal transmission, connect the USB cable directly to your computer’s USB port. Power Supply Requirement 1. Standard power adapter: 5V 2A (not included). Non-standard adapters may cause the device to malfunction even when connected. 2. The power port supplies power only to USB devices, not to computers.

Recommended USB Cable 1. Use the included 1.5m USB A to A cables for best performance. 2. Using extension cables or third-party USB cables longer than 1.5m may cause signal instability. For USB-C Computer To connect this switch to a Mac or other USB-C-only computers, use a USB-C to A adapter with a USB A to A cable. A USB-C to A cable alone won't work. PC Sleep Mode Issue If USB devices disconnect after waking from sleep, disable power-saving setting. 1. For Windows : Control Panel > System and Security > Power Options > Change Plan Settings > Change Advanced Power Settings > USB Settings > USB Selective Suspend > Disable.1 Device Manager > Universal Serial Bus controllers > Right-click detected hubs > Properties > Power Management > Uncheck "Allow the computer to turn off this device to save power. 2. For Mac : System Preferences > Battery > Disable "Prevent computer from sleeping when display is off" and "Enable Power Nap while plugged in." Package Includes 1. USB 3.0 Switch ×1 (4.8 x 2.1 x 0.7 inches) 2.USB A to A Cable ×2 (5FT/1.5M) 3.Remote Control ×1 (5FT/1.5M)

UGREEN 5 Bay USB-C to SATA HDD SSD RAID Enclosure

~~$299.99~~ $90.00

UGREEN 80Gbps Thunderbolt 5 M.2 NVMe SSD Enclosure

~~$229.99~~ $69.00