Shop by Device

UGREEN 240W PD 3.1 USB C Charger Cable

~~$11.99~~ $3.60

UGREEN x Honkai: Star Rail 100W Retractable USB-C Cable

~~$19.99~~ $6.00

UGREEN Nexode 240W USB-C Cable with Digital Display

~~$24.99~~ From $7.50

UGREEN M.2 NVMe SATA SSD Enclosure 10Gbps USB 3.2 Gen 2

~~$29.99~~ $9.00

UGREEN NVMe SSD Enclosure

~~$259.99~~ $78.00

UGREEN USB 3.0 4-Port Switch With 2 Pack USB Male Cable

~~$36.99~~ $11.10

UGREEN USBC Switch - 2-Port, 4 x USB 3.2, 10Gbps Data

~~$69.99~~ $21.00

Previous page

Next page

Previous page

Next page

Attention

About USB A Laptop Only need to use a USB-A to C data cable (best within 1.2ft/0.8m) to connect this switch and computer. Input Tip: This is a USB C switch not a KVM switch and doesn't support a monitor; the USB-C input does not support video and there is no HDMI input. This device is designed for data transmission and does not support video transmission. Output Tip: The USB port at the output is only used for data transfer and does not support power supply for a laptop/USB devices or video transmission. Not suggested to connect wireless devices to USB 3.0 switch due to 2.4Ghz co-channel interference (industry problem). If your wireless network is affected, please set your router frequency from 2.4GHz to 5GHz. About Data Cable Length: Using a cable longer than 0.8M may cause a drop in transmission speed. About Power Supply: When connected to a USB-C laptop port, this device can output a Max 2.4A, enough power to run four 3.5" HDD/SSD or two 2.5" 1TB HDD/SSD at once.

When connected to a USB-A laptop port, please note that due to the limitation of the USB-A port output current, the switch only can output 5V2A. Other: Connect to USB-C IN1 and USB-C IN2 simultaneously, PC 1 will be given priority to share USB devices. Package Content: USB 3.2 Switch * 1 (4.8 x 2.1 x 0.7 Inches); USB C to C Cable * 2 (2.6FT/0.8M); Remote Control *1 (5FT/1.5M) About Mac: For Mac OS 13.3 and above, please allow usb devices to work by doing this setting: Use the mac's own touchpad to choose Apple menu > System Settings > Privacy & Security >Click the pop-up menu next to “Allow accessories to connect“ > Choose "Always". About PC is sleeping: If the USB device is disconnected after the PC is awakened from sleep mode, it may be caused by the energy saving mode. Please turn off energy saving and try again. [Windows] 1. Control Panel > System and Security > Power Options > Select the "Change Plan Setting" option next to your current power plan > Select "Change advanced power settings"> "Power Options"> "Expand the USB Settings section and double-click USB selective suspend setting."> Select "disable". 2. Device Manager > Universal Serial Bus controllers > right-click all hubs that have been detected > select "Properties"> Power Management > deselect "Allow the computer to turn off this device to save power." [Mac] Please follow the below steps to disable the Mac into auto-sleep to see if the issue can be solved: System Performace > Battery > Disable "Prevent computer from sleeping automatically when the display is off", and disable "Enable Power Nap while plugged into a power adapter".

UGREEN 2.5 Inch USB Hard Drive Enclosure

~~$22.83~~ $6.85

UGREEN 40Gpbs Hard Drive Enclosure with Cooling Fan

~~$109.99~~ $33.00

UGREEN USB 2.0 Switch 2 In 4 Output USB KVM Switch

~~$23.99~~ $7.20

UGREEN USB 3.0 Switch 2 Computers Sharing USB C & A Devices

~~$45.99~~ $13.80

Previous page

Next page

Previous page

Next page

Attention

NO KVM Switch This USB switch has no HDMI port and doesn't support sharing a display between two computers. NOT Video Transfer Designed for data transfer only, not video transmission. Keyboard & Mouse Disconnection 1. Due to 2.4GHz interference between wireless signals, multiple wireless devices connected to the USB switch may not function properly (industry issue).If interference occurs, switch your devices from 2.4GHz to 5GHz. 2.If the device srtill does not work properly, connect the power adapter to provide sufficient power supply. Avoid Using a USB Hub Not connect the switch through a USB Hub, as it may degrade signal quality. For stable signal transmission, connect the USB cable directly to your computer’s USB port. Power Supply Requirement 1. Standard power adapter: 5V 2A (not included). Non-standard adapters may cause the device to malfunction even when connected. 2. The power port supplies power only to USB devices, not to computers.

Recommended USB Cable 1. Use the included 1.5m USB A to A cables for best performance. 2. Using extension cables or third-party USB cables longer than 1.5m may cause signal instability. For USB-C Computer To connect this switch to a Mac or other USB-C-only computers, use a USB-C to A adapter with a USB A to A cable. A USB-C to A cable alone won't work. PC Sleep Mode Issue If USB devices disconnect after waking from sleep, disable power-saving setting. 1. For Windows : Control Panel > System and Security > Power Options > Change Plan Settings > Change Advanced Power Settings > USB Settings > USB Selective Suspend > Disable.1 Device Manager > Universal Serial Bus controllers > Right-click detected hubs > Properties > Power Management > Uncheck "Allow the computer to turn off this device to save power. 2. For Mac : System Preferences > Battery > Disable "Prevent computer from sleeping when display is off" and "Enable Power Nap while plugged in." Package Includes 1. USB 3.0 Switch ×1 (4.8 x 2.1 x 0.7 inches) 2.USB A to A Cable ×2 (5FT/1.5M) 3.Remote Control ×1 (5FT/1.5M)

UGREEN 5 Bay USB-C to SATA HDD SSD RAID Enclosure

~~$299.99~~ $90.00

UGREEN 20W USB C to Lightning Cable 3.3FT

~~$18.99~~ $5.70

UGREEN USB C to Lightning Audio Adapter

~~$30.32~~ $9.10

UGREEN Braided USB-C to Lightning Dongle Adapter Cable Type C Male to Lightning Female Cord for iPad, Macbook and Android USB C Phones

Listen to Your USB-C Devices

This work perfectly to convert if you have a lightning earphone but your device only has the USB-C port.

Built-in Powerful DAC Chip, Immerse in Your Music Feast

Empowered a high-performance DAC chip, Type-C to Lightning audio adapter is compatible with up to 24bit/48Khz, you can get higher fidelity sound experience from it, hear the clarity in any genre of music.
Made of enameled copper, ensuring high fidelity sound quality and without current noise.

Plug and Play

Compatible with Lightning earphone/headphones

Configuration Instructions on Macs:

Connect the adapter to Mac and connect Lightning headphone to the adapter
Choose Apple menu > System Preferences, then click Sound.
Choose the Output tab and select "Lightning Audio Adapter Output.”
Choose the Input tab and select "Lightning Audio Adapter Input.”

Plug and Play

Compatible with Lightning earphone/headphones

Configuration Instructions on Macs:

Connect the adapter to Mac and connect Lightning headphone to the adapter
Choose Apple menu > System Preferences, then click Sound.
Choose the Output tab and select "Lightning Audio Adapter Output.”
Choose the Input tab and select "Lightning Audio Adapter Input.”
Tailored for MFi-certified Lightning headphones

- EarPods with Lightning connector

- Beats UrBeats3 with Lightning connector

- Sennheiser Ambeo Smart Headset

- Audeze Sine DX, EL-8 Titanium, iSine10

- Pioneer Rayz, Rayz Plus, Rally

- Radius HP-NEL21, HP-NEL31, HC-M100L, and HP-NHL21

- Libratone Q-Adapt in-ear lightning headphones

- RHA MA650i with Lightning

- Moshi Avanti LT, Mythro LT
Note:
- It only works with Windows laptops with Windows 10 or above.
- For Huawei phones, this USB C to Lightning Female Adapter can’t support phone call.
- Connect the original Apple earphones as much as possible.
- Voice only No charging Capabilit

UGREEN 80Gbps Thunderbolt 5 M.2 NVMe SSD Enclosure

~~$229.99~~ $69.00